ATAGO(爱宕)的自动折射仪的操作方式简单,且具有精确、测量值可以信赖的产品设计特性。当与传统和阿贝折射仪相较,数字大屏幕的设计将让使用者更容易读取测量值。

RX-α series

A Wide Selection to Meet
Every Measurement Need

RX-i series

The world's highest standard of technology now
available with touch screen.

触摸屏式全自动台式数显折光仪 RX-5000i-Plus

The most accurate refractometer in the world is now even more stylish, smart, and functional.
Featuring intuitive touch screen technology, the new RX-i series makes navigation and selection a breeze.
The RX-5000i-Plus measures with the same accuracy level as the RX-5000α-Plus - ±0.010% Brix and ±0.00002 nD.
The RX-i series come with newly added functions, such as USB flash drive and self-diagnosis capability.
This product comes standard with a two (2) year limited warranty against manufacturer's defects from the date of the original purchase. The warranty period can be extended to three (3) years if the product is registered with ATAGO.
This unit is accompanied by a software for documenting measured data for tracebility. The software is intended to help ATAGO product users to maintain compliance with FDA Title 21 CFR Part11.


Enlargement
Quantity

>about the icons RS-232C Interface External temperature samples User scales can be inputted Measurement at a set temperature Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-5000i-Plus 型号 3275
测量范围 Refractive index (nD) : 1.32422 to 1.58000
Brix : 0.000 to 100.000%
( 5 to 75°C ATC)
最小显示单位 Refractive index (nD) : 0.00001
Brix : 0.001%
Temperature: 0.01°C
Measurement Accuracy Refractive index (nD) :
±0.00002
Brix : ±0.010%
Temperature control range 5.00 to 75.00°C
(No lower than 10°C below the ambient temperature and no higher than 55°C above the ambient temperature)
Repeatability Refractive index : ±0.00001 Brix : ±0.010% 电源 AC100V to 240V, 50/60Hz
电力损耗 90VA 尺寸重量 37×26×14cm, 6.6kg
(Main Unit only)
测量形式 MODE-1:
Displays the measurement value once the sample reaches the target temperature.

MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.

MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.

MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.

MODE-T:
Recommended for Measuring Low Brix Liquid Samples (such as teas)
Equipped only on the RX-5000i-Plus, MODE-T is recommended for users who place importance on obtaining highly repeatable results (Brix0.001%).
输出终端机 • Printer (for ATAGO digital printers)
• Computer -USB
Warranty 2 years standard (3 years with product registration) excluding touchscreen
选件 Digital Printer DP-63 : Cat.No.3118
Digital Printer DP-AD : Cat.No.3123
MAGIC™(metal) : RE-56180
MAGIC™(resin) : RE-56185
Flow cell attachment : RE-56172
10% Sucrose (±0.01%) : RE-111001
20% Sucrose (±0.01%) : RE-112001
30% Sucrose (±0.01%) : RE-113001
40% Sucrose (±0.02%) : RE-114002
50% Sucrose (±0.02%) : RE-115002
* Calibration Certificate : Contact an ATAGO representative for details.
消耗品/零件 Printer paper (regular) for DP-63 : RE-8412
Printer paper (long-term storage)for DP-63 : RE-8414
Printer paper for DP-AD : RE-89403
Ribbon cassette for DP-AD : RE-89402
• Fan Filter Replacement : RE-58001
下载型录 ( English only )
Go to the product search GO TOP

触摸屏式全自动台式数显折光仪 RX-5000i

The most accurate refractometer in the world is now even more stylish, smart, and functional.
Featuring intuitive touch screen technology, the new RX-i series makes navigation and selection a breeze.
The RX-5000i measures with the same accuracy level as the RX-5000α ±0.03% Brix and ±0.00004 nD.
The RX-i series come with newly added functions, such as USB flash drive and self-diagnosis capability.
This product comes standard with a two (2) year limited warranty against manufacturer's defects from the date of the original purchase. The warranty period can be extended to three (3) years if the product is registered with ATAGO.
This unit is accompanied by a software for documenting measured data for tracebility. The software is intended to help ATAGO product users to maintain compliance with FDA Title 21 CFR Part11.


Enlargement
Quantity

>about the icons RS-232C Interface External temperature samples User scales can be inputted Measurement at a set temperature Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-5000i 型号 3276
测量范围 Refractive index (nD) : 1.32422 to 1.58000
Brix : 0.00 to 100.00%
( 5 to 75°C ATC)
最小显示单位 Refractive index (nD) : 0.00001
Brix : 0.01%
Temperature: 0.01°C
Measurement Accuracy Refractive index (nD) :
±0.00004
Brix : ±0.03%
Temperature control range 5.00 to 75.00°C
(No lower than 10°C below the ambient temperature and no higher than 55°C above the ambient temperature)
Repeatability Refractive index : ±0.00002
Brix : ±0.01%
电源 AC100V to 240V, 50/60Hz
电力损耗 90VA 尺寸重量 37×26×14cm, 6.6kg
(Main Unit only)
测量形式 MODE-1:
Displays the measurement value once the sample reaches the target temperature.

MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.

MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.

MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.
输出终端机 • Printer (for ATAGO digital printers)
• Computer -USB
Warranty 2 years standard (3 years with product registration) excluding touchscreen
选件 Digital Printer DP-63 : Cat.No.3118
Digital Printer DP-AD : Cat.No.3123
MAGIC™(metal) : RE-56180
MAGIC™ (resin) : RE-56185
Flow cell attachment : RE-56172
10% Sucrose (±0.01%) : RE-111001
20% Sucrose (±0.01%) : RE-112001
30% Sucrose (±0.01%) : RE-113001
40% Sucrose (±0.02%) : RE-114002
50% Sucrose (±0.02%) : RE-115002
* Calibration Certificate : Contact an ATAGO representative for details.
消耗品/零件 Printer paper (regular) for DP-63 : RE-8412
Printer paper (long-term storage)for DP-63 : RE-8414
Printer paper for DP-AD : RE-89403
Ribbon cassette for DP-AD : RE-89402
• Fan Filter Replacement : RE-58001
下载型录 ( English only )
Go to the product search GO TOP

触摸屏式全自动台式数显折光仪 RX-7000i

Featuring intuitive touch screen technology, the new RX-i series makes navigation and selection a breeze.
The RX-i series come with newly added functions, such as USB flash drive and self-diagnosis capability.
The RX-7000i features an even wider refractive index range than its predecessor.
This product comes standard with a two (2) year limited warranty against manufacturer's defects from the date of the original purchase. The warranty period can be extended to three (3) years if the product is registered with ATAGO.
This unit is accompanied by a software for documenting measured data for tracebility. The software is intended to help ATAGO product users to maintain compliance with FDA Title 21 CFR Part11.


Enlargement
Quantity

>about the icons RS-232C Interface External temperature samples User scales can be inputted Measurement at a set temperature Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-7000i Cat.No. 3279
Measurement Range Refractive index (nD) : 1.32422 to 1.70000
Brix : 0.00 to 100.00%
( 5 to 75°C ATC )
Minimum indication Refractive index (nD) :
0.00001 (0.0001)*
Brix : 0.01% (0.1%)*
Temperature: 0.01°C
*Factory default setting
Measurement Accuracy
*Repeatability
Refractive index (nD) :
±0.0001
*±0.00005
Brix : ±0.1%
*±0.02%
[*1]
Temperature control range 5.00 to 75.00°C
(No lower than 10°C below the ambient temperature and no higher than 55°C above the ambient temperature)
Power Supply AC100V to 240V, 50/60Hz
Power consumption 90VA Dimensions & weight 37×26×14cm, 7.0kg
(Main Unit only)
Mode MODE-1:
Displays the measurement value once the sample reaches the target temperature.

MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.

MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.

MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.
Output terminals • Printer (for ATAGO digital printers)
• Computer -USB
Warranty 2 years standard (3 years with product registration) excluding touchscreen
Optional Digital Printer DP-63 : Cat.No.3118
Digital Printer DP-AD : Cat.No.3123
MAGIC™(metal) : RE-56180
MAGIC™ (resin) : RE-56185
Flow cell attachment : RE-56173
10% Sucrose (±0.01%) : RE-111001
20% Sucrose (±0.01%) : RE-112001
30% Sucrose (±0.01%) : RE-113001
40% Sucrose (±0.02%) : RE-114002
50% Sucrose (±0.02%) : RE-115002
* Calibration Certificate : Contact an ATAGO representative for details.
Parts Printer paper (regular) for DP-63 : RE-8412
Printer paper (long-term storage)for DP-63 : RE-8414
Printer paper for DP-AD : RE-89403
Ribbon cassette for DP-AD : RE-89402
• Fan Filter Replacement : RE-58001
[*1] When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C
下载型录 ( English only )
Go to the product search GO TOP

自动折射仪 RX-5000α( alpha )-Plus

台式折射仪RX-5000α(alpha)-Plus是以RX-5000α(alpha)作为标准并提高其精度的新产品。它的精度为Brix ±0.010 至 nD ±0.00002.
此产品可以以内置的恒温功能快速且高精度地测量各种液体的折射率,Brix以及浓度 :

• 具有内置的恒温功能,不需要恒温水箱。
• 等达到目标温度后自动开始测量。
• 很快速地显示折射率以及Brix值。
• 具有 Brix ±0.010 至 nD ±0.00002 的高精度。
• 会显示测量结果是否在您所设置的范围内。
• 带手动校正功能。
• 能够输入60种用户标度。
• 能够保存最新的30个测量纪录。
This unit is accompanied by a software for documenting measured data for tracebility. The software is intended to help ATAGO product users to maintain compliance with FDA Title 21 CFR Part11.


扩大
数量

>Icon说明 RS-232C Interface External temperature samples User scales can be inputted Measurement at a set temperature Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-5000α( alpha )-Plus 型号 3266
测量范围 折射指数(nD):
1.32700 至 1.58000
糖度(Brix):
0.000 至 100.000%
( 5 至 60°C ATC)
最小显示单位 折射指数(nD):0.00001
糖度(Brix):0.005%
温度:0.01°C
测量准确度 折射指数(nD):±0.00002
糖度(Brix):±0.010%
重复性 折射指数(nD):±0.00001
糖度(Brix):±0.010%
测量温度 5 至 60°C 电源 AC100V 至 240V, 50/60Hz
电力损耗 65VA 尺寸重量 37×26×14公分, 6.4千克 (不含零件的重量)
测量形式 MODE-1:
Displays the measurement value once the sample reaches the target temperature.

MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.

MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.

MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.
输出终端机 • 打印机 ( 数字打印机 ATAGO )
• RS-232C
选件 • 数字打印机 DP-RX:型号 3121
• 数字打印机 DP-RD:型号 3122
MAGIC™(metal) : RE-56180
MAGIC™ (resin) : RE-56185
RX-5000α用装样漏斗 : RE-56172
10% 蔗糖溶液 (±0.01%): RE-111001
20% 蔗糖溶液 (±0.01%): RE-112001
30% 蔗糖溶液 (±0.01%): RE-113001
40% 蔗糖溶液 (±0.02%): RE-114002
50% 蔗糖溶液 (±0.02%): RE-115002
消耗品/零件 • RX-5000α用机罩:RE-6532
DP-62α,DP-RX用打印紙:RE-8412
DP-62α,DP-RX用长效使用打印紙:RE-8414
DP-RD用打印紙:RE-89403
DP-RD用墨盒:RE-89402
• 备用(交换用)排气过滤器:RE-58001
下载型录 ( English only )
搜索产品 GO TOP

自动折射仪 RX-5000α( alpha )

RX-5000α( alpha ) 是能够内部设定测量温度的自动折射仪,能够快速地测量折射指数、糖度或各式液体的浓度,以下为本产品的特性:

• 因为RX-5000α( alpha ) 具有电热模块以控制温度,所以不需要恒温水箱。
• 在样本达到目标温度之后,测量会自动开始。
• 在目标温度下,折射指数与糖度会快速显示
• 可取得高糖度 ±0.03% 与折射指数 ±0.00004 准确度。
• RX-5000α( alpha ) 会显示您所设的控制范围的高低界线。
• 如果测量值与您的标准液体值或其它折射仪测量的不同,将能做部分调整。
• 根据您的样本,能够输入60种使用者标度。
• RX-5000α( alpha ) 能够显示最少30个最近的测量值。

* RX-5000α( alpha ) 特殊标度如果需要,我们可在发货前设定折射率及BRIX(白利度)以外的另一种标度(例如蜂蜜水分,盐水浓度等)。 如果有什么疑问,请尽管与我们联系。
This unit is accompanied by a software for documenting measured data for tracebility. The software is intended to help ATAGO product users to maintain compliance with FDA Title 21 CFR Part11.


扩大
数量

>Icon说明 RS-232C Interface External temperature samples User scales can be inputted Measurement at a set temperature Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-5000α( alpha ) 型号 3261
测量范围 折射指数(nD):
1.32700 至 1.58000
糖度(Brix):
0.00 至 100.00%
( 5 至 60°C ATC)
最小显示单位 折射指数(nD):0.00001
糖度(Brix):0.01%
温度:0.01°C
测量准确度 折射指数(nD):±0.00004
糖度(Brix):±0.03%
重复性 折射指数(nD):±0.00002
糖度(Brix):±0.01%
测量温度 5 至 60°C 电源 AC100V 至 240V, 50/60Hz
电力损耗 65VA 尺寸重量 37×26×14公分, 6.4千克 (不含零件的重量)
测量形式 MODE-1:
Displays the measurement value once the sample reaches the target temperature.

MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.

MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.

MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.
输出终端机 • 打印机 ( 数字打印机 ATAGO )
• RS-232C
选件 • 数字打印机 DP-RX:型号 3121
• 数字打印机 DP-RD:型号 3122
MAGIC™(metal) : RE-56180
MAGIC™ (resin) : RE-56185
RX-5000α用装样漏斗 : RE-56172
10% 蔗糖溶液 (±0.01%): RE-111001
20% 蔗糖溶液 (±0.01%): RE-112001
30% 蔗糖溶液 (±0.01%): RE-113001
40% 蔗糖溶液 (±0.02%): RE-114002
50% 蔗糖溶液 (±0.02%): RE-115002
消耗品/零件 • RX-5000α用机罩:RE-6532
DP-62α,DP-RX用打印紙:RE-8412
DP-62α,DP-RX用长效使用打印紙:RE-8414
DP-RD用打印紙:RE-89403
DP-RD用墨盒:RE-89402
• 备用(交换用)排气过滤器:RE-58001
下载型录 ( English only )
搜索产品 GO TOP

自动折射仪 RX-5000α-Bev

自动折射仪RX-5000α-Bev是为了饮料厂家制造的RX系列产品. 由于此产品的菱镜平, 样品很容易擦掉.
RX-5000α-Bev具有RX-5000α所具有的各项功能.
This unit is accompanied by a software for documenting measured data for tracebility. The software is intended to help ATAGO product users to maintain compliance with FDA Title 21 CFR Part11.

扩大
数量

>Icon说明 RS-232C Interface External temperature samples User scales can be inputted Measurement at a set temperature Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-5000α-Bev 型号 3271
测量范围 折射指数(nD):
1.32700 至 1.58000
糖度(Brix):
0.00 至 100.00%
( 5 至 60°C ATC)
最小显示单位 折射指数(nD):0.00001
糖度(Brix):0.01%
温度:0.01°C
测量准确度 折射指数 (nD):±0.00004
糖度(Brix):±0.03%
重复性 折射指数(nD):±0.00002
糖度(Brix):±0.01%
测量温度 5 至 60°C 电源 AC100V 至 240V, 50/60Hz
电力损耗 65VA 尺寸重量 37×26×14公分, 6.1千克 (不含零件的重量)
测量形式 MODE-1:
Displays the measurement value once the sample reaches the target temperature.

MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.

MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.

MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.
输出终端机 • 打印机 (数字打印机 ATAGO )
• RS-232C
选件 • 数字打印机 DP-RX:型号 3121
• 数字打印机 DP-RD:型号 3122
消耗品/零件 • RX-5000α-Bev用机罩:RE-65159
DP-RX用打印紙:RE-8412
DP-RX用长效使用打印紙:RE-8414
DP-RD用打印紙:RE-89403
DP-RD用墨盒:RE-89402
• 备用(交换用)排气过滤器:RE-58001
下载型录 ( English only )
搜索产品 GO TOP

自动折射仪 RX-7000α( alpha )

RX-7000是依RX-5000α( alpha )折射指数的测量范围与测量温度再加以改善的升级版本,并具有电热模块以维持恒温。最适合用来衡量油品与脂肪的高融点、较高折射指数的香水、有机溶剂等。本产品具有手动刻度制订功能,可以协调其它折射仪所测量的不同标准液体值与测量值。
This unit is accompanied by a software for documenting measured data for tracebility. The software is intended to help ATAGO product users to maintain compliance with FDA Title 21 CFR Part11.


扩大
数量

>Icon说明 RS-232C Interface User scales can be inputted Measurement at a set temperature External temperature samples High temperature samples Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-7000α( alpha ) 型号 3262
测量范围 折射指数(nD):
1.32500 至 1.70000
糖度(Brix):
0.00 至 100.0%
(ATC:5 至 70°C)
最小显示单位 折射指数(nD) :
0.0001/0.00001 (可选择)
糖度(Brix):
0.1%/0.01% (可选择)
温度:0.01
测量准确度 折射指数(nD):± 0.0001
糖度(Brix):± 0.1%
重复性 折射指数(nD):±0.00005
糖度(Brix):±0.02%
测量温度 5 至 70°C 电源 AC100V 至 240V, 50/60Hz
电力损耗 65VA 尺寸重量 37×26×14公分, 6.8千克 (不含零件的重量)
测量形式 MODE-1:
Displays the measurement value once the sample reaches the target temperature.

MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.

MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.

MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.
输出终端机 • 打印机 (数字打印机 ATAGO )
• RS-232C
选件 • 数字打印机 DP-RX:型号 3121
• 数字打印机 DP-RD:型号 3122
MAGIC™(metal) : RE-56180
MAGIC™ (resin) : RE-56185
RX-7000α用装样漏斗 : RE-56173
10% 蔗糖溶液 (±0.01%): RE-111001
20% 蔗糖溶液 (±0.01%): RE-112001
30% 蔗糖溶液 (±0.01%): RE-113001
40% 蔗糖溶液 (±0.02%): RE-114002
50% 蔗糖溶液 (±0.02%): RE-115002
消耗品/零件 • RX-7000α用机罩:RE-6532
DP-62α,DP-RX用打印紙:RE-8412
DP-62α,DP-RX用长效使用打印紙:RE-8414
DP-RD用打印紙:RE-89403
DP-RD用墨盒:RE-89402
• 备用(交换用)排气过滤器:RE-58001
下载型录 ( English only )
搜索产品 GO TOP

自动折射仪 RX-9000α( alpha )

RX-9000α是ATAGO数字式折射仪中最高性能产品。 此产品具有广泛的测量范围,测量温度及很高的测量精度,可广泛适用于熔点高的油脂及折射率的高的香料,有机溶剂的测量等。它装备恒温功能, 本产品具有手动校正功能,可补正标准值,与标准液或其他折射仪的读值同步化
This unit is accompanied by a software for documenting measured data for tracebility. The software is intended to help ATAGO product users to maintain compliance with FDA Title 21 CFR Part11.

扩大
数量

>Icon说明 RS-232C Interface User scales can be inputted Measurement at a set temperature External temperature samples High temperature samples Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-9000α( alpha ) 型号 3263
测量范围 折射指数(nD):
1.32500 至1.70000
糖度(Brix):
0.00 至 100.00%
(ATC:5 至 70°C)
最小显示单位 折射指数 (nD)
0.00001 / 0.0001
糖度(Brix):
0.01% / 0.1%
温度:0.01°C
测量准确度 • 折射指数 (nD) : ±0.00004
( nD 1.33299 至 1.42009 测量温度 10.00 至 30.00°C )
• 折射指数 (nD) : ±0.00010 ( 近红外线透镜 )
• 糖度 (Brix) : ±0.03%
( Brix 0.00 至 50.00% 测量温度 10.00 至30.00°C )
• 糖度 (Brix) : ±0.05%
( Brix 50.01 至 95.00% 测量温度 10.00 至 30.00°C )
• 糖度 (Brix) : ±0.10%
( 除了上面以外都是BRIX±0.10% 以MODE1测量蔗糖液时 )
重复性 • 折射指数 (nD) : ±0.00002
(nD 1.33299 至 1.42009, 测量温度 10.00 至 30.00°C )
• 折射指数 (nD) : ±0.00005 ( 近红外线透镜 )
• 糖度 (Brix) : ±0.01%
( Brix 0.00 至 50.00% 测量温度 10.00 至30.00°C )
• 糖度 (Brix) : ±0.02%
( 除了上面以外都是BRIX±0.02% 以MODE1测量蔗糖液时 )
测量温度 5 至 70°C 电源 AC100V 至 240V, 50/60Hz
电力损耗 65VA 尺寸重量 37×26×14公分, 6.8千克 (不含零件的重量)
测量形式 MODE-1:
Displays the measurement value once the sample reaches the target temperature.

MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.

MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.

MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.
输出终端机 •打印机 ( ATAGO 数字打印机 )
•RS-232C
选件 • 数字打印机 DP-RX : 型号 3121
• 数字打印机 DP-RD:型号 3122
MAGIC™(metal) : RE-56180
MAGIC™ (resin) : RE-56185
RX-9000α用装样漏斗 : RE-56173
10% 蔗糖溶液 (±0.01%): RE-111001
20% 蔗糖溶液 (±0.01%): RE-112001
30% 蔗糖溶液 (±0.01%): RE-113001
40% 蔗糖溶液 (±0.02%): RE-114002
50% 蔗糖溶液 (±0.02%): RE-115002
消耗品/零件 • RX-9000α用机罩:RE-6532
DP-RX用打印紙:RE-8412
DP-RX用长效使用打印紙:RE-8414
DP-RD用打印紙:RE-89403
DP-RD用墨盒:RE-89402
• 备用(交换用)排气过滤器:RE-58001
下载型录 ( English only )
搜索产品 GO TOP

茶.低糖饮料浓度计 RX-007α (alpha)

RX-007α可以达到精度±0.005%, 适用于测量浓度未到5%的绿茶,红茶,乌龙茶及其他低糖饮料. 操作方法简单, 只要将样本滴在菱镜上面按开始键就可以了.
与其他RX系列一样具有恒温功能.
This unit is accompanied by a software for documenting measured data for tracebility. The software is intended to help ATAGO product users to maintain compliance with FDA Title 21 CFR Part11.


扩大
数量

>Icon说明 RS-232C Interface External temperature samples User scales can be inputted Measurement at a set temperature Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-007α 型号 3921
测量范围 Brix 0.000 至 5.000%
折射指数 (RI):
1.330150 至 1.341500
最小显示单位 Brix 0.001%
折射指数(RI):0.000001
温度:0.01°C
测量准确度 Brix:±0.005%
折射指数(RI): ±0.000010 (在20度摄氏)
(在某个环境温度与恒温温度下)
测量温度 15.00 至 30.00°C 测量形式 2 种形式
电源 AC100V 至 240V, 50/60Hz
尺寸重量 37×26×14公分, 6.7千克(不含零件的重量)
电力损耗 65VA
打印机输出 • 打印机 (数字打印机 ATAGO )
• RS-232C
选件 • 数字打印机 DP-RX:型号 3121
• 数字打印机 DP-RD:型号 3122
蔗糖溶液 0.25%(±0.005%) : RE-110250
蔗糖溶液 0.50%(±0.005%) : RE-110500
蔗糖溶液 1.00%(±0.005%) : RE-111000
消耗品/零件 • RX-007α用机罩:RE-56157
DP-RX用打印紙:RE-8412
DP-RX用长效使用打印紙:RE-8414
DP-RD用打印紙:RE-89403
DP-RD用墨盒:RE-89402
• 备用(交换用)排气过滤器:RE-58001
下载型录 ( English only )
搜索产品 GO TOP

自动折射仪 RX-5000

此产品与RX-alpha系列不同,不带恒温功能,它可以与恒温水箱连接控制温度测量。其他特征完全与RX-alpha系列同样。


扩大
数量
>Icon说明 RS-232C Interface User scales can be inputted Measurement at a set temperature External temperature samples Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-5000 型号 3281
测量范围 折射指数(nD):
1.32700 至 1.58000
糖度(Brix):
0.00 至 100.00%
最小显示单位 折射指数(nD):0.00001%
糖度(Brix):0.01%
测量准确度 折射指数(nD):±0.00004
糖度(Brix):±0.03%
重复性 折射指数(nD):±0.00002
糖度(Brix):±0.01%
测量温度 5 至 60°C 电源 AC100 至 240V, 50/60Hz
环境温度 5 至 40°C 电力损耗 30VA
尺寸重量 37×26×14公分, 6.4千克 (不含零件的重量) 输入电压
输出电压
折射仪DC5V, 6A
打印机DC6.5V, 1.5
输出终端机 • 打印机输出 ( 可选购数字打印机 DP-RX )
• RS-232C
选件 • 数字打印机 DP-RX:型号 3121
• 数字打印机 DP-RD:型号 3122
10% 蔗糖溶液 (±0.01%): RE-111001
20% 蔗糖溶液 (±0.01%): RE-112001
30% 蔗糖溶液 (±0.01%): RE-113001
40% 蔗糖溶液 (±0.02%): RE-114002
50% 蔗糖溶液 (±0.02%): RE-115002
消耗品/零件 • RX-5000用机罩:RE-6532
• 扎带:RE-8507
DP-62α,DP-RX用打印紙:RE-8412
DP-62α,DP-RX用长效使用打印紙:RE-8414
DP-RD用打印紙:RE-89403
DP-RD用墨盒:RE-89402
搜索产品GO TOP

数字打印机 DP-62(AD)

DP-62是自动折射仪RX系列的专用打印机。当折射仪测量完成时、它能自动打印出样本编号、折射指数的测量值 ( nD 或n Dt )、糖度(Brix) ( % )、浓度( % ) (使用者标度)、与测量温度。


扩大
数量
Model DP-62(AD) 型号 3148
打印方式 热敏打印 电源 DC8.5V 折射仪
电力损耗 13VA 尺寸重量 17×16×7公分, 580公克 (不含零件的重量)
消耗品/零件 DP-62用打印紙 : RE-8412
DP-62用长效使用打印紙 : RE-8414
搜索产品 GO TOP

数字打印机 DP-RX

DP-RX是RX-5000ALPHA (对应序号No. 052601以上)及RX-7000ALPHA(对应序号No. 051301以上)使用的打印机.DP-RX可自动打印样品号,折射率,BRIX值, 浓度 ( % ) (用户标度一种)及测量温度.


扩大
数量
Model DP-RX 型号. 3121
打印方式 热敏打印 电源 从AC 转接器(从折射仪)
(输入电压:AC100 至 240V)
电力损耗 13VA 尺寸重量 17×16×7公分, 580公克 (不含零件的重量)
消耗品/零件 DP-RX用打印紙 : RE-8412
DP-RX用长效使用打印紙 : RE-8414
搜索产品 GO TOP

数字打印机 DP-RD

DP-RD是 RX-α使用的打印机.DP-RD可自动打印样品号, 折射率, BRIX ( % ), 浓度 ( % ) (用户标度一种), 测量温度. DP-RD对应普通打印纸.


扩大
数量
Model DP-RD 型号. 3122
打印方式 击打式点阵打印机
(针式打印机)
电源 从AC 转接器(从折射仪)
(输入电压:AC100 至 240V)
电力损耗 7VA 尺寸重量 11×18×9公分, 470公克 (不含零件的重量)
消耗品/零件 DP-RD用打印紙 : RE-89403
DP-RD用墨盒 : RE-89402
搜索产品 GO TOP