ATAGO(愛宕)的自動折射儀的操作方式簡單,且具有精確、測量值可以信賴的產品設計特性。當與傳統和阿貝折射儀相較,數位大螢幕的設計將讓使用者更容易讀取測量值。

RX-α series

A Wide Selection to Meet
Every Measurement Need

RX-i series

The world's highest standard of technology now
available with touch screen.

觸摸屏式全自動台式數顯折光儀 RX-5000i-Plus

The most accurate refractometer in the world is now even more stylish, smart, and functional.
Featuring intuitive touch screen technology, the new RX-i series makes navigation and selection a breeze.
The RX-5000i-Plus measures with the same accuracy level as the RX-5000α-Plus - ±0.010% Brix and ±0.00002 nD.
The RX-i series come with newly added functions, such as USB flash drive and self-diagnosis capability.
This product comes standard with a two (2) year limited warranty against manufacturer's defects from the date of the original purchase. The warranty period can be extended to three (3) years if the product is registered with ATAGO.
This unit is accompanied by a software for documenting measured data for tracebility. The software is intended to help ATAGO product users to maintain compliance with FDA Title 21 CFR Part11.


Enlargement
Quantity

>about the icons RS-232C Interface External temperature samples User scales can be inputted Measurement at a set temperature Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-5000i-Plus 型號 3275
測量範圍 Refractive index (nD) : 1.32422 to 1.58000
Brix : 0.000 to 100.000%
( 5 to 75°C ATC)
最小指示值 Refractive index (nD) : 0.00001
Brix : 0.001%
Temperature: 0.01°C
測量準確度 Refractive index (nD) :
±0.00002
Brix : ±0.010%
Temperature control range 5.00 to 75.00°C
(No lower than 10°C below the ambient temperature and no higher than 55°C above the ambient temperature)
Repeatability Refractive index : ±0.00001 Brix : ±0.010% 電源 AC100V to 240V, 50/60Hz
電力損耗 90VA 尺寸重量 37×26×14cm, 6.6kg
(Main Unit only)
測量形式 MODE-1:
Displays the measurement value once the sample reaches the target temperature.

MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.

MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.

MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.

MODE-T:
Recommended for Measuring Low Brix Liquid Samples (such as teas)
Equipped only on the RX-5000i-Plus, MODE-T is recommended for users who place importance on obtaining highly repeatable results (Brix0.001%).
輸出終端機 • Printer (for ATAGO digital printers)
• Computer -USB
Warranty 2 years standard (3 years with product registration) excluding touchscreen
選件 Digital Printer DP-63 : Cat.No.3118
Digital Printer DP-AD : Cat.No.3123
MAGIC™(metal) : RE-56180
MAGIC™(resin) : RE-56185
Flow cell attachment : RE-56172
10% 蔗糖溶液 (±0.01%) : RE-111001
20% 蔗糖溶液 (±0.01%) : RE-112001
30% 蔗糖溶液 (±0.01%) : RE-113001
40% 蔗糖溶液 (±0.02%) : RE-114002
50% 蔗糖溶液 (±0.02%) : RE-115002
* Calibration Certificate : Contact an ATAGO representative for details.
消耗品/零件 Printer paper (regular) for DP-63 : RE-8412
Printer paper (long-term storage)for DP-63 : RE-8414
Printer paper for DP-AD : RE-89403
Ribbon cassette for DP-AD : RE-89402
• Fan Filter Replacement : RE-58001
下載型錄 ( English only )
Go to the product search GO TOP

觸摸屏式全自動台式數顯折光儀 RX-5000i

The most accurate refractometer in the world is now even more stylish, smart, and functional.
Featuring intuitive touch screen technology, the new RX-i series makes navigation and selection a breeze.
The RX-5000i measures with the same accuracy level as the RX-5000α ±0.03% Brix and ±0.00004 nD.
The RX-i series come with newly added functions, such as USB flash drive and self-diagnosis capability.
This product comes standard with a two (2) year limited warranty against manufacturer's defects from the date of the original purchase. The warranty period can be extended to three (3) years if the product is registered with ATAGO.
This unit is accompanied by a software for documenting measured data for tracebility. The software is intended to help ATAGO product users to maintain compliance with FDA Title 21 CFR Part11.


Enlargement
Quantity

>about the icons RS-232C Interface External temperature samples User scales can be inputted Measurement at a set temperature Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-5000i 型號 3276
測量範圍 Refractive index (nD) : 1.32422 to 1.58000
Brix : 0.00 to 100.00%
( 5 to 75°C ATC)
最小指示值 Refractive index (nD) : 0.00001
Brix : 0.01%
Temperature: 0.01°C
測量準確度 Refractive index (nD) :
±0.00004
Brix : ±0.03%
Temperature control range 5.00 to 75.00°C
(No lower than 10°C below the ambient temperature and no higher than 55°C above the ambient temperature)
Repeatability Refractive index : ±0.00002
Brix : ±0.01%
電源 AC100V to 240V, 50/60Hz
電力損耗 90VA 尺寸重量 37×26×14cm, 6.6kg
(Main Unit only)
測量形式 MODE-1:
Displays the measurement value once the sample reaches the target temperature.

MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.

MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.

MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.
輸出終端機 • Printer (for ATAGO digital printers)
• Computer -USB
Warranty 2 years standard (3 years with product registration) excluding touchscreen
選件 Digital Printer DP-63 : Cat.No.3118
Digital Printer DP-AD : Cat.No.3123
MAGIC™(metal) : RE-56180
MAGIC™ (resin) : RE-56185
Flow cell attachment : RE-56172
10% 蔗糖溶液 (±0.01%) : RE-111001
20% 蔗糖溶液 (±0.01%) : RE-112001
30% 蔗糖溶液 (±0.01%) : RE-113001
40% 蔗糖溶液 (±0.02%) : RE-114002
50% 蔗糖溶液 (±0.02%) : RE-115002
* Calibration Certificate : Contact an ATAGO representative for details.
消耗品/零件 Printer paper (regular) for DP-63 : RE-8412
Printer paper (long-term storage)for DP-63 : RE-8414
Printer paper for DP-AD : RE-89403
Ribbon cassette for DP-AD : RE-89402
• Fan Filter Replacement : RE-58001
下載型錄 ( English only )
Go to the product search GO TOP

觸摸屏式全自動台式數顯折光儀 RX-7000i

Featuring intuitive touch screen technology, the new RX-i series makes navigation and selection a breeze.
The RX-i series come with newly added functions, such as USB flash drive and self-diagnosis capability.
The RX-7000i features an even wider refractive index range than its predecessor.
This product comes standard with a two (2) year limited warranty against manufacturer's defects from the date of the original purchase. The warranty period can be extended to three (3) years if the product is registered with ATAGO.
This unit is accompanied by a software for documenting measured data for tracebility. The software is intended to help ATAGO product users to maintain compliance with FDA Title 21 CFR Part11.


Enlargement
Quantity

>about the icons RS-232C Interface External temperature samples User scales can be inputted Measurement at a set temperature Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-7000i Cat.No. 3279
Measurement Range Refractive index (nD) : 1.32422 to 1.70000
Brix : 0.00 to 100.00%
( 5 to 75°C ATC )
Minimum indication Refractive index (nD) :
0.00001 (0.0001)*
Brix : 0.01% (0.1%)*
Temperature: 0.01°C
*Factory default setting
Measurement Accuracy
*Repeatability
Refractive index (nD) :
±0.0001
*±0.00005
Brix : ±0.1%
*±0.02%
[*1]
Temperature control range 5.00 to 75.00°C
(No lower than 10°C below the ambient temperature and no higher than 55°C above the ambient temperature)
Power Supply AC100V to 240V, 50/60Hz
Power consumption 90VA Dimensions & weight 37×26×14cm, 7.0kg
(Main Unit only)
Mode MODE-1:
Displays the measurement value once the sample reaches the target temperature.

MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.

MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.

MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.
Output terminals • Printer (for ATAGO digital printers)
• Computer -USB
Warranty 2 years standard (3 years with product registration) excluding touchscreen
Optional Digital Printer DP-63 : Cat.No.3118
Digital Printer DP-AD : Cat.No.3123
MAGIC™(metal) : RE-56180
MAGIC™ (resin) : RE-56185
Flow cell attachment : RE-56173
10% Sucrose (±0.01%) : RE-111001
20% Sucrose (±0.01%) : RE-112001
30% Sucrose (±0.01%) : RE-113001
40% Sucrose (±0.02%) : RE-114002
50% Sucrose (±0.02%) : RE-115002
* Calibration Certificate : Contact an ATAGO representative for details.
Parts Printer paper (regular) for DP-63 : RE-8412
Printer paper (long-term storage)for DP-63 : RE-8414
Printer paper for DP-AD : RE-89403
Ribbon cassette for DP-AD : RE-89402
• Fan Filter Replacement : RE-58001
[*1] When measuring a standard sucrose solution of up to 50% Brix or standard refractive index solution in MODE-1 at 20°C
下載型錄 ( English only )
Go to the product search GO TOP

自動折射儀 RX-5000α(alpha) - Plus

台式折射儀RX-5000α(alpha)-Plus是以RX-5000α(alpha)作為標准並提高其精度的新產品。它的精度為Brix ±0.010 至 nD ±0.00002.
此產品可以以 內 置的皕聽\能快速且高精度地 測量各種液體的折射率, Brix 以及濃度:
• 具有內置的皕聽\能,不需要皕聾蘀c。
• 等達到目標溫度後自動開始測量。
• 很快速地顯示折射率以及Brix值。
• 具有Brix ±0.010 至 nD ±0.00002的高精度。
• 會顯示測量結果是否在您所設置的範圍內。
• 帶手動校正功能。
• 能夠輸入60種用戶標度。
• 能夠保存最新的30個測量紀錄。
This unit is accompanied by a software for documenting measured data for tracebility. The software is intended to help ATAGO product users to maintain compliance with FDA Title 21 CFR Part11.


擴大
數量

>Icon說明 RS-232C Interface External temperature samples User scales can be inputted Measurement at a set temperature Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-5000α( alpha )-Plus 型號 3266
測量範圍 屈折指數 (nD)
1.32700 至 1.58000
糖度(Brix)
0.000 至 100.000 %
( 5 至 60°C ATC)
最小指示值 屈折指數 (nD) 0.00001
糖度(Brix) 0.005%
溫度: 0.01 C
測量準確度 屈折指數 (nD)
± 0.00002
糖度(Brix) ± 0.010%
重複性 屈折指數 (nD)
± 0.00001
糖度(Brix) ± 0.010%
測量溫度 5 至 60°C 電源 AC 100 至 240V, 50/60Hz
電力損耗 65VA 尺寸重量 37×26×14公分, 6.4千克
(不含零件的重量)
測量形式 MODE-1:
Displays the measurement value once the sample reaches the target temperature.

MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.

MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.

MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.
輸出終端機 •印阜絔輸出 (ATAGO 數位印表機)
•RS-232C
選件 • 數位印表機 DP-RX:型號 3121
• 數位印表機 DP-RD:型號 3122
MAGIC™(metal) : RE-56180
MAGIC™ (resin) : RE-56185
RX-5000α用裝樣漏鬥 : RE-56172
10% 蔗糖溶液 (±0.01%): RE-111001
20% 蔗糖溶液 (±0.01%): RE-112001
30% 蔗糖溶液 (±0.01%): RE-113001
40% 蔗糖溶液 (±0.02%): RE-114002
50% 蔗糖溶液 (±0.02%): RE-115002
消耗品/零件 • RX-5000α用機罩:RE-6532
DP-62α, DP-RX用打印紙:RE-8412
DP-62α, DP-RX用長效使用打印紙:RE-8414
DP-RD用打印紙:RE-89403
DP-RD用墨盒:RE-89402
• 備用 (交換用) 排氣過濾器:RE-58001
  下載型錄 ( English only )
搜索產品 GO TOP

自動折射儀 RX-5000α(alpha)

RX-5000α(alpha)是能夠內部設定測量溫度的自動折射儀,能夠快速地測量屈折指數、糖度或各式液體的濃度,以下為本產品的特性:
• 因為RX-5000α(alpha)具有電熱模組以控叔蚥度,所以不需要拮蚥水箱。
• 在樣本達到目標溫度之後,測量會自動開始。
• 在目標溫度下,屈折指數與糖度會快速顯示。
• 可取得高糖度(Brix) ± 0.03%與屈折指數 ± 0.00004 準確度。
• RX-5000α(alpha)會顯示您所設的控叔掾圍的高低界線。
• 如果測量值與您的標準液體值或其他折射儀測量的不同,將能做部分調整。
• 根據您的樣本,能夠輸入60種使用者標度。
• RX-5000α(alpha) 能夠顯示最少30個最近的測量值。

* RX-5000α(alpha) 特殊標度
如果需要,我們可在發貨前設定折射率及BRIX(白利度)以外的另一種標度(例如蜂蜜水分,鹽水濃度等)。 如果有什麼疑問,請盡管與我們聯系。

This unit is accompanied by a software for documenting measured data for tracebility. The software is intended to help ATAGO product users to maintain compliance with FDA Title 21 CFR Part11.


擴大
數量

>Icon說明 RS-232C Interface External temperature samples User scales can be inputted Measurement at a set temperature Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-5000α ( alpha ) 型號 3261
測量範圍 屈折指數 (nD)
1.32700 至 1.58000
糖度(Brix)
0.00 至 100.00 %
( 5 至 60°C ATC)
最小指示值 屈折指數 (nD) 0.00001
糖度(Brix) 0.01%
溫度: 0.01 C
測量準確度 屈折指數 (nD)
± 0.00004
糖度(Brix) ± 0.03%
重複性 屈折指數 (nD)
± 0.00002
糖度(Brix) ± 0.01%
測量溫度 5 至 60°C 電源 AC 100 至 240V, 50/60Hz
電力損耗 65VA 尺寸重量 37×26×14公分, 6.4千克
(不含零件的重量)
測量形式 MODE-1:
Displays the measurement value once the sample reaches the target temperature.

MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.

MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.

MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.
輸出終端機 •印阜絔輸出 (ATAGO 數位印表機)
•RS-232C
選件 • 數位印表機 DP-RX:型號 3121
• 數位印表機 DP-RD:型號 3122
MAGIC™(metal) : RE-56180
MAGIC™ (resin) : RE-56185
RX-5000α用裝樣漏鬥 : RE-56172
10% 蔗糖溶液 (±0.01%): RE-111001
20% 蔗糖溶液 (±0.01%): RE-112001
30% 蔗糖溶液 (±0.01%): RE-113001
40% 蔗糖溶液 (±0.02%): RE-114002
50% 蔗糖溶液 (±0.02%): RE-115002
消耗品/零件 • RX-5000α用機罩:RE-6532
DP-62α, DP-RX用打印紙:RE-8412
DP-62α, DP-RX用長效使用打印紙:RE-8414
DP-RD用打印紙:RE-89403
DP-RD用墨盒:RE-89402
• 備用(交換用)排氣過濾器:RE-58001
下載型錄 ( English only )
搜索產品 GO TOP

自動折射儀 RX-5000α-Bev

RX-5000α-Bev是為了飲料廠家制造的RX系列產品.由于此產品的菱鏡平, 樣品很容易擦掉 RX-5000α-Bev具有RX-5000α所具有的各項功能
This unit is accompanied by a software for documenting measured data for tracebility. The software is intended to help ATAGO product users to maintain compliance with FDA Title 21 CFR Part11.

擴大
數量

>Icon說明 RS-232C Interface External temperature samples User scales can be inputted Measurement at a set temperature Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-5000α-Bev 型號 3271
測量範圍 屈折指數 (nD):
1.32700 至 1.58000
糖度(Brix):
0.00 至 100.00%
( 5 至 60°C ATC)
最小指示值 屈折指數 (nD):0.00001
糖度(Brix) :0.01%
溫度 :0.01°C
測量準確度 屈折指數 (nD):±0.00004
糖度(Brix) :±0.03%
重複性 屈折指數 (nD):±0.00002
糖度(Brix):±0.01%
測量溫度 5 至 60°C 電源 AC100V 至 240V, 50/60Hz
電力損耗 65VA 尺寸重量 37×26×14公分, 6.1千克 (不含零件的重量)
測量形式 MODE-1:
Displays the measurement value once the sample reaches the target temperature.

MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.

MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.

MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.
輸出終端機 • 印阜絔輸出 ( 數位印表機 ATAGO )
• RS-232C
選件 • 數位印表機 DP-RX:型號 3121
• 數位印表機 DP-RD:型號 3122 Z
10% 蔗糖溶液 (±0.01%): RE-111001
20% 蔗糖溶液 (±0.01%): RE-112001
30% 蔗糖溶液 (±0.01%): RE-113001
40% 蔗糖溶液 (±0.02%): RE-114002
50% 蔗糖溶液 (±0.02%): RE-115002
消耗品/零件 • RX-5000α-Bev用機罩:RE-65159
DP-RX用打印紙:RE-8412
DP-RX用長效使用打印紙:RE-8414
DP-RD用打印紙:RE-89403
DP-RD用墨盒:RE-89402
• 備用(交換用)排氣過濾器:RE-58001
下載型錄 ( English only )
搜索產品 GO TOP

自動折射儀 RX-7000α(alpha)

RX-7000是依RX-5000α(alpha)屈折指數的測量範圍與測量溫度再加以改善的升級版本,並具有熱電模組以維持恆溫。最適合用來衡量油品與脂肪的高融點、較高屈折指數的香水、有機溶劑等。本產品具有手動刻度制訂功能,可以協調其他折射儀所測量的不同標準液體值與測量值。
This unit is accompanied by a software for documenting measured data for tracebility. The software is intended to help ATAGO product users to maintain compliance with FDA Title 21 CFR Part11.


擴大
數量

>Icon說明 RS-232C Interface User scales can be inputted Measurement at a set temperature External temperature samples High temperature samples Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-7000α( alpha ) 型號 3262
測量範圍 屈折指數 (nD) :
1.32500 至 1.70000
糖度(Brix) :
0.0 至100.0%
(ATC:5 至 70°C)
最小指示值 屈折指數 (nD):
0.0001/0.00001 (可選擇)
糖度 (Brix) :
0.1% / 0.01% (可選擇)
溫度: 0.01
測量準確度 屈折指數 (nD)
± 0.0001
糖度 (Brix) ± 0.1%
測量溫度 5 至 70°C
重複性 屈折指數 (nD) ± 0.00005
糖度 (Brix) ± 0.2%
電源 AC 100 至 240V, 50/60Hz
電力損耗 65VA 尺寸重量 37×26×14公分, 6.8千克
(不含零件的重量)
測量形式 MODE-1:
Displays the measurement value once the sample reaches the target temperature.

MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.

MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.

MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.
輸入終端機 •印阜絔輸出 ( 數位印表機 ATAGO )
•RS-232C
選件 • 數位印表機 DP-RX:型號 3121
• 數位印表機 DP-RD:型號 3122
MAGIC™(metal) : RE-56180
MAGIC™ (resin) : RE-56185
RX-7000α用裝樣漏鬥 : RE-56173
10% 蔗糖溶液 (±0.01%): RE-111001
20% 蔗糖溶液 (±0.01%): RE-112001
30% 蔗糖溶液 (±0.01%): RE-113001
40% 蔗糖溶液 (±0.02%): RE-114002
50% 蔗糖溶液 (±0.02%): RE-115002
消耗品/零件 • RX-7000α用機罩:RE-6532
DP-62α, DP-RX用打印紙:RE-8412
DP-62α, DP-RX用長效使用打印紙:RE-8414
DP-RD用打印紙:RE-89403
DP-RD用墨盒:RE-89402
• 備用(交換用)排氣過濾器:RE-58001
下載型錄 ( English only )
搜索產品 GO TOP

自動折射儀 RX-9000α(alpha)

RX-9000α是ATAGO數字式折射儀中最高性能產品。 此產品具有廣泛的測量範圍,測量溫度及很高的測量精度,可廣泛適用于熔點高的油脂及折射率的高的香料,有機溶劑的測量等。它裝備皕聽\能, 本產品具有手動校正功能,可補正標准值,與標准液或其他折射儀的讀值同步化
This unit is accompanied by a software for documenting measured data for tracebility. The software is intended to help ATAGO product users to maintain compliance with FDA Title 21 CFR Part11.

擴大
數量

>Icon說明 RS-232C Interface User scales can be inputted Measurement at a set temperature External temperature samples High temperature samples Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-9000α 型號 3263
測量範圍 屈折指數(nD)
1.32500 至 1.70000
糖度(Brix)
0.00 至 100.00 %
(ATC:5 至 70°C)
最小指示值 屈折指數(nD)
0.00001/0.0001 (可選擇)
糖度(Brix)
0.01% / 0.1% (可選擇)
溫度: 0.01°C
測量準確度 • 屈折指數(nD):±0.00004
(nD 1.33299 至 1.42009,測量溫度 10.00 至 30.00°C )
• 屈折指數(nD):±0.00010 (上面範圍以外)
• 糖度(Brix):±0.03%
(Brix 0.00 至 50.00%,測量溫度 10.00 至 30.00°C)
• 糖度(Brix):±0.05%
(Brix 50.01 至 95.00%,測量溫度10.00 至 30.00°C)
• 糖度(Brix):±0.10%
(除了上面以外都是BRIX±0.10%以MODE1測量蔗糖液時)
重複性 • 屈折指數 (nD):±0.00002
(nD 1.33299 至 1.42009 測量溫度 10.00 至 30.00°C )
• 屈折指數 (nD):±0.00005 (上面範圍以外)
• 糖度(Brix):±0.01%
(Brix 0.00 至 50.00%,測量溫度 10.00 至 30.00°C )
• 糖度(Brix):±0.02%
(除了上面以外都是BRIX±0.02%以MODE1測量蔗糖液時)
測量溫度 5 至 70°C 尺寸重量 37×26×14公分, 6.8千克
(不含零件的重量)
電力損耗 65VA 電源 AC100V 至 240V, 50/60Hz
測量形式 MODE-1:
Displays the measurement value once the sample reaches the target temperature.

MODE-2:
Measures refractive index and temperature at fixed intervals and displays the estimated measurement value at the target temperature.

MODE-3:
The thermo-module can be turn off. Without temperature control, the measurement value is displayed in 4 seconds after the START key is pressed.

MODE-S:
Displays the measurement value once a certain level of sample stability is achieved.
輸出終端機 •印阜絔輸出 ( ATAGO 數位印表機 )
•RS-232C
選件 • 數位印表機 DP-RX:型號 3121
• 數位印表機 DP-RD:型號 3122
MAGIC™(metal) : RE-56180
MAGIC™ (resin) : RE-56185
RX-9000α用裝樣漏鬥 : RE-56173
10% 蔗糖溶液 (±0.01%): RE-111001
20% 蔗糖溶液 (±0.01%): RE-112001
30% 蔗糖溶液 (±0.01%): RE-113001
40% 蔗糖溶液 (±0.02%): RE-114002
50% 蔗糖溶液 (±0.02%): RE-115002
消耗品/零件 • RX-9000α用機罩:RE-6532
DP-RX用打印紙:RE-8412
DP-RX用長效使用打印紙:RE-8414
DP-RD用打印紙:RE-89403
DP-RD用墨盒:RE-89402
• 備用(交換用)排氣過濾器:RE-58001
下載型錄 ( English only )
搜索產品 GO TOP

茶.低糖飲料濃度計 RX-007α(alpha)

RX-007α可以達到精度±0.005%, 適用于測量濃度未到5%的綠茶,紅茶,烏龍茶及其他低糖飲料. 操作方法簡單, 只要將樣本滴在菱鏡上面按開始鍵就可以了.與其他RX系列一樣具有皕聽\能.
This unit is accompanied by a software for documenting measured data for tracebility. The software is intended to help ATAGO product users to maintain compliance with FDA Title 21 CFR Part11.


擴大
數量

>Icon說明 RS-232C Interface External temperature samples User scales can be inputted Measurement at a set temperature Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-007α 型號 3921
測量範圍 Brix 0.000 至 5.000%
屈折指數(RI)
1.330150 至 1.341500
最小指示值 Brix 0.001%
屈折指數 (RI) 0.000001
溫度 0.01°C
測量準確度 Brix±0.005%
屈折指(RI):±0.000010
(在20度攝氏)
(在某個環境溫度與皕韁贖蚺U)
尺寸重量 37×26×14公分, 6.7千克
(不含零件的重量)
測量溫度 15.00 至 30.00°C 測量形式 2 種形式
電源 AC100V 至 240V, 50/60Hz
電力損耗 65VA
印阜絔輸出 • 印阜絔輸出 (數位印表機 ATAGO )
• RS-232C
選件 • 數位印表機 DP-RX:型號 3121
• 數位印表機 DP-RD:型號 3122
蔗糖溶液 0.25%(±0.005%) : RE-110250
蔗糖溶液 0.50%(±0.005%) : RE-110500
蔗糖溶液 1.00%(±0.005%) : RE-111000
消耗品/零件 • RX-007α用機罩:RE-56157
DP-RX用打印紙:RE-8412
DP-RX用長效使用打印紙:RE-8414
DP-RD用打印紙:RE-89403
DP-RD用墨盒:RE-89402
• 備用(交換用)排氣過濾器:RE-58001
下載型錄 ( English only )
搜索產品 GO TOP

自動折射儀 RX-5000

此產品與RX-alpha系列不同,不帶皕聽\能,它可以與皕聾蘀c連接控制溫度測量。其他特征完全與RX-alpha系列同樣。


擴大
數量
>Icon說明 RS-232C Interface User scales can be inputted Measurement at a set temperature External temperature samples Calibration with water Digital display AC outlet (AC100 to 240V) Refractive index scale
Model RX-5000 型號 3281
測量範圍 屈折指數(nD)
1.32700 至 1.58000
糖度(Brix)
0.00 至 100.00%
最小指示值 屈折指數(nD) 0.00001
糖度(Brix) 0.01%
測量準確度 屈折指數(nD)
± 0.00004
糖度(Brix) ± 0.03%
重複性 屈折指數(nD)
± 0.00002
糖度(Brix) ± 0.01%
溫度校正 5 至 60°C 測量溫度 5 至 40°C
電力損耗 30VA 電源 AC100 至 240V, 50/60Hz
尺寸重量 37×26×14公分, 6.4千克
(不含零件的重量)
輸入電壓
輸出電壓
折射儀 DC5V, 6A
印表機 DC6.5V, 1.5
輸出終端機 印表機輸出 ( 數位印表機 DP-RX )
RS-232C 輸出
選件 • 數位印表機 DP-RX:型號 3121
• 數位印表機 DP-RD:型號 3122
10% 蔗糖溶液 (±0.01%): RE-111001
20% 蔗糖溶液 (±0.01%): RE-112001
30% 蔗糖溶液 (±0.01%): RE-113001
40% 蔗糖溶液 (±0.02%): RE-114002
50% 蔗糖溶液 (±0.02%): RE-115002
消耗品/零件 • RX-5000用機罩:RE-6532
• 紮帶:RE-8507
DP-62α, DP-RX用打印紙:RE-8412
DP-62α, DP-RX用長效使用打印紙:RE-8414
DP-RD用打印紙:RE-89403
DP-RD用墨盒:RE-89402
搜索產品 GO TOP

數位印表機 DP-62(AD)

DP-62 是自動折射儀RX系列的專用印阜絔。睛癮折度計測量完成時、它能自動列印出樣本編號、屈折指數的測量值 (nD 或 nDt)、糖度(Brix)(%)、濃度(%)(使用者標度)、與測量溫度。


擴大
數量
Model DP-62(AD) 型號 3148
列印方式 熱敏打印 電源 DC8.5V 從折射儀
電力損耗 13VA 尺寸重量 17×16×7公分, 580公克
(不含零件的重量)
消耗品/零件 DP-62用打印紙:RE-8412
DP-62用長效使用打印紙:RE-8414
搜索產品 GO TOP

數位印表機 DP-RX

自動折射儀 RX-5000α(序號這適用于數字式折射儀RX-5000α(序號No.052601以上)及RX-7000α(序號No.051301以上).可自動打印折射率(nD) Brix%、用戶標度、測量溫度.


擴大
數量
Model DP-RX 型號 3121
列印方式 熱敏打印 電源 AC100 至 240V
電力損耗 13VA 尺寸重量 17×16×7公分, 580公克
(不含零件的重量)
消耗品/零件 DP-RX用打印紙:RE-8412
DP-RX用長效使用打印紙:RE-8414
搜索產品 GO TOP

數位印表機 DP-RD

DP-RD 是RX-ALPHA系列使用的打印機. DP-RD可自動打印樣品號、折射率、BRIX值、濃度(%)(用戶標度一種)及測量溫度、對應普通打印紙.


擴大
數量
Model DP-RD 型號 3122
列印方式 擊打式點陣打印機
(針式打印機)
電源 AC100 至 240V, 50/60Hz
電力損耗 7VA 尺寸重量 11×18×9公分, 470公克
(不含零件的重量)
消耗品/零件 DP-RD用打印紙:RE-89403
DP-RD用墨盒:RE-89402
搜索產品 GO TOP